永不磨灭的番号演员表,男人女人做爽爽18禁免费,法国满天星《八尺夫人》菲律宾,女人下边被舔全过视频的网址,大地资源在线高清

When we are using a molding machine, or one or several mold temperature machines, the temperature difference of each mold temperature machine itself is actually not very large; what we will talk about next, for the mold temperature machine In terms of speaking, we actually need to pay attention to the fact that we can't directly use the pipeline as a divergence to use it. In this way, we can only guarantee its own quality.

    When using the mold temperature machine equipment, we actually need to pay attention to the best, that is, do not use oil-type equipment; in the following, we actually need to pay attention to the fact that we can not use a large mold temperature machine to adjust the number. The temperature on the sub-model, what I will say next, is actually because the large-scale equipment can not take into account the small-scale equipment.

     Next, for a temperature sensor of the same model, it will actually directly feed back to the thermostat. In this respect, we are also not good at controlling the temperature. When designing the equipment, we should pay attention to the fact that the flow of circulating water should be a turbulent flow.

     When performing maintenance on the mold temperature machine, we actually should pay attention to directly check a flow rate of itself. Next, we actually need to calibrate a thermometer. At this time, In fact, we can directly use a good quality of circulating water, we can not directly inject cooling water or water overflow phenomenon.

     For the maintenance of the mold temperature machine, we actually have to pay attention to avoiding the on-off of the cooling water and the heater directly; in the following, we actually have to pay attention to the fact that we cannot adjust it at will The size of the opening on the valve needs to be fully opened for use; it is not only effective with a mold temperature machine, but in fact, it needs to be complementary to the model design.